Greenwich Roofing: Article About Roof Safety
Working on the roof of a house can be dangerous, particularly if the roofing system is damaged or there are adverse weather conditions like wind, rain, or snow. In order to be safe, professional Greenwich roofing contractors wear safety gear and use certain types of equipment to protect themselves in case of injury. Any homeowner who also wants to do rooftop maintenance, such as gutter cleaning or hanging holiday decorations, should also be familiar with the OSHA standards for personal protective equipment used by roofers.
The most important piece of equipment to use is a hard hat or helmet. These close fitting hats use a strap to obtain a snug fit. Inside of the helmet are layers of cushioning foam to protect the head against the impact from a fall. Wearing one of these helmets is essential for anyone who needs to climb a ladder or work on the second story of a house.
Another critical piece of gear is safety goggles. By protecting the eyes from flying debris, the goggles help the worker to see safely while using cutting tools or applying gritty materials.
The expert roofers at Sound Renovation of Greenwich can assist you with any questions regarding metal roofing or asphalt roofing.
Tasks such as slicing replacement fascia or soffit boards, soldering seams in aluminum gutters, or applying tar to a flat roof should all be done while wearing goggles.
The materials used on a roofing system may be sharp, roughly textured, or hot. To protect the hands from these hazards, anyone doing roof work should wear sturdy gloves made from leather or a similar material. These gloves offer flexibility to hold materials and move the hands while also protecting against cuts, burns, blisters, and abrasions.
Proper footwear is also helpful for roofing projects. Surfaces like metal and slate can be slippery to walk on, but rubber soled shoes and work boots help to boost the traction between the foot and the roof. These kinds of shoes should also be worn during emergency repairs on icy or wet rooftops.
When someone needs to work on a steeply sloped roof or on the second story of a home, a safety harness is recommended by the OSHA rules. Safety harnesses use a system of clips and ropes strapped to a seat of sorts. If the worker started to slip or slide, the harness would stop the person from free falling to the ground below. Many contractors use harnesses in conjunction with elevated platforms and scaffolding to help provide better footing and a flat surface for standing or walking on.